CES Uncle John's Blend (0-0-2)
CES Uncle John's Blend supplies potassium along with iron in a unique and proprietary formula. This unique combination catalyzes plant enzymes and metabolizes carbohydrates in order to increase the plant sugars produced during the late flowering phase. Uncle John's Blend can also be used as a foliar spray to reduce transplanting stress and to correct potassium deficiencies in flowering plants.
CES Uncle John's Blend is a complex potassium mixture used primarily to enhance a plant's metabolic rate, especially for flowering plants during the blooming stage. Potassium is a major component in photosynthetic processes, including the production of ATP (plant sugars) and the transfer of those sugars throughout the plant tissue. The low molecular weight of Uncle John's Blend makes it very available to the plant for immediate use, as well as making a very "clean" foliar spray that will not leave heavy built-up or residue on the plant tissue.
CES Uncle John's Blend is designed for use in hydroponics, soil-less, continuous feed systems, drain to waste, and soil applications.
Can also be used in conjunction with other Cutting Edge Solutions nutrients.
Directions for use
Derived from Potassium Sulfate Iron (Fe) - 0.1%
Derived from Ferrous Sulfate
Information regarding the contents and levels of metals in this product is available at: http://www.aapfco.org/metals.htm
CES Uncle John's Blend is a highly concentrated solution. Never mix undiluted concentrates, as this may result in nutrient lock-up. Add each nutrient consecutively, allowing ample time for each concentrate used to thoroughly dilute and mix into the water.
*If preparing a nutrient stock tank, to be used over a period of time exceeding 24 hours, you must aerate nutrient reservoir regularly.*
- Shake well and measure carefully using a milliliter measuring cup. If using CES Micro, add Micro first to water, then other nutrients.
- After nutrients are mixed in water, adjust pH to 4.5-6.5. If your pH naturally falls within these parameters, pH adjustment is not necessary.
- Monitor ppm and EC in reservoir and top off with fresh water as needed. Reservoir temperature should be 60-68 degrees F.
- Do not store product in direct sunlight. Do not freeze.