CES Micro 6-0-0 1 quart

(No reviews yet) Write a Review
$13.95 $11.89
(You save $2.06)
UPC:
81786701000
Weight:
40.00 Ounces
CES Micro 6-0-0 1 quart

CES Micro is the foundation of the CES mineral-based line. Micro is to be used in conjunction with the grow and/or bloom, in order to achieve a solid fertilizer base which can be used on it's own, or built on with CES additives to achieve maximum growth. Micro is comprised of a high quality Nitrogen and Calcium base, fortified with micro nutrients. Micro is to be used throughout the entire growth cycle of a plant, regardless of vegetative or flowering cycles. Micro is highly concentrated and needs to be diluted and mixed first, before adding any other components of the CES system, failure to do so can cause lock-out with other ingredients.

Directions For Use

FULL STRENGTH
For Drain to Waste / Soil Applications: check brochure / Feed Chart for mixing ratios
Micro 6-0-0™ Bloom 0-6-5™ Grow 2-1-6™
Clones & Seedlings (after roots) 5 ml/gal 5 ml/gal 10 ml/gal
Vegetative Stages (1 – 2 weeks) 8 ml/gal 5 ml/gal 15 – 20 ml/gal

Early Flowering
Transition Stage (1 – 2 weeks) 8 ml/gal 15 ml/gal 5 ml/gal

Full Bloom
Fruiting Stage (4 – 8 weeks) 8 ml/gal 15 – 20 ml/gal none
Flush Stage (5 – 10 days) 2.5 ml/gal 5 ml/gal none

Micro 6-0-0™ is a highly concentrated nutrient solution. Never mix undiluted concentrates as this may result in nutrient lock-up. Add other nutrients separately to water and aerate reservoir regularly. Do not add additional Micro 6-0-0™ to a prepared reservoir. Shake well and measure carefully using a milliliter measuring cup. Mix Micro 6-0-0™ first into fresh water, stir well, then add other nutrients. After nutrients are mixed in water, adjust pH to 4.5-6.5. Monitor ppm and EC in reservoir and top off with fresh water as needed. Empty and refill tanks every 1-2 weeks. Reservoir water temperature should be 60-68 degrees F. Do not store product in direct sunlight. Do not freeze.

Micro 6-0-0™ is designed for use in hydroponics, soilless, continuous feed systems, drain to waste, and soil applications.

Guaranteed Analysis. 

Total Nitrogen (N) 6.0%
    0.3% Ammoniacal Nitrogen
    5.7% Nitrate Nitrogen
Calcium (Ca) 5.0%
Boron (B) 0.02%
Iron (Fe) 0.1%
Manganese (Mn) 0.05%
Molybdenum (Mo) 0.0008%

Derived from: Sodium Molybdate, Calcium Nitrate, Zinc Nitrate, Boric Acid, Calcium Carbonate, Manganese, EDTA, Iron EDDHA, and Iron DPTA.
Information regarding the contents and levels of metals in this product is available at: http://www.aapfco.org/metals.html